life drawing

my girlfriend have been attending life drawing sessions down in hastings (at a very reasonable price) and what follows is what i have done so far.

thank you for looking

alex

simons cat

this is another present that I made for my girlfriend for our anniversary.

thanks for looking

alex

no new work

it's been a while since my last post and i really haven't done much in the way of sculpting mostly because of my new job. however i thought i would put up some pictures of some older work that has yet to be shown.

this was my first attempt at pumpkin carving of an abc robot.

this is the small set for one of my animations, these are just light tests but it is still one of my favorite sets that i have made. It is made of foam board that i cut and bent into a tunnel, i then coated the walls in pva glue and sand and the floor is made from pva mixed with shards of plaster then coated in water effect.

this is a stop motion puppet that i made of a victorian soldier. the skull (pictured left) has a hinged jaw that could be move using a bolt that resides in the center of the skull. i used an allen key to move it and i hid the hole in the head with his hair. his face was made of a thin skin of latex (pictured below).

this is the sculpt for my two-face costume. I first sculpted a rough likeness of myself (left), i then started the final sculpt. this was the first sculpt that I didn't use references for as i had an idea of what I wanted it to look like.

this is a commission sculpt that i did for a young graphic artist, it is based on his comic book character Brocolli Man. he had a rough idea of what he wanted with it and gave me a quick drawing but i was given quite a bit of artistic license. as you can see he was pretty happy with it and it took about ten minutes until he stopped swearing.

thanks for looking
alex

hello again.
i haven't done much recently as i have been searching for a job and with christmas present searching. however i have managed to sculpt a few things so here they are.

finding nemo
"hey there mr grumpy gills"

first off i apologize for the background of this picture, like all my work this is made from super sculpey. the reason i made this that i was watching finding nemo and it came to my favorite scene, so i thought that i should make it. it took 1 day to make marlin and 2 days for dory.

parsley the lion figure

i made parsley the lion for my girlfriend as part of her christmas presents, it didn't take too long as it's only small but i am quite happy with the detailing.

if you have any questions about sculpting please leave a comment and i will reply as best i can.

cheers
alex

CLONE WARS WICKET

I was watching Star Wars the Clone Wars series 3 the other day and saw the episode with chewbacca and it got me wondering, what would an ewok look like? so I grabbed a picture off the internet of the most loved ewok, wicket. i decided that i would only make a bust as sculpting the body would drive me nuts and i only wanted to spend a day making it. i quickly drew a slightly simplified design.

once I was happy with the design i got my materials and started sculpting the face, this took the best part of 5 hours. I used super sculpey with metal ball bearings for eyes. I attached each clump of hair individually. once that was done I made the rest of the head in the same way. when everything was cooked i used green stuff to add some finer detail on his hood, fur on the ears and to fill in some of the gap on the face.

when everything had set i painted it using games workshop acrylics. from start to finish this took 15 hours and is roughly 3 inches tall (not including base pictured below).

  

star wars clone wars wicket

thank you for looking

alex

old work part 3

 As a model maker I, of course, started with games workshop miniatures. The model on the left is based on one of my favorite drawings (below). i had to build the legs and lower torso from scratch and heavily convert the rest. Although i made this figure about four years ago, i am still proud of it as I got quite a lot of detail into it.

this is another sculpt that is based on a drawing. it is wolverine being eaten by a t-rex. i wanted to do this for ages but didn't know how to start. then i got the idea to get a t-rex toy and convert it, but all of the ones that i found never quite fit the bill. then one day i went to hastings and went into a little model store and my girlfriend called me over and showed me this facial reconstruction kit of a rex. it consisted of a skull and tools. i made the rex out of milliput and wolverine out of super sculpey (my first time using this material).

 I designed this yoda whilst on holiday in greece. when i got back i put it with all my other used pads and doodles and forgot about it for a few years. One day i was rooting through my drawings and i found it. the following week i was having a star wars day with my friends so i decided to make it. i only had a little bit of sculpey so i got a jam jar lid and started sculpting.

i made this ork bust because i was bored and had some clay to hand. it was a bit of a quick job to make. i think i made it in a day including painting.

this was one of my last games workshop figures that i made. The original model was just a plain dreadnaught that came in a box set. I then proceeded to completely destroy the poor thing and broke out the green stuff. this took about a week to build and i am particularly happy with the little nurglings sitting on it.



for a better image of the dreadnaught, please check out
http://www.coolminiornot.com/artist/yeta.123/orderby/Descending?browseid=2025166

cannimation

http://vimeo.com/31566327

this is just a quick post, i want to show you my entry into a red bull competition. it is inspired by steampunk and frankenstein. i hope you like it.

alex